Dimensions 153 x 84 x 39.5 mm (6.02 x 3.31 x 1.56″) Weight 250 g (8.82 oz) Enclosure material UV-stabilized polycarbonate Mounting Pole mount, wall mount (Kit included) Wind survivability 200 km/h (125 mph) Wind loading 20 N at 200 km/h (4.5 lbf at 125 mph) Hardware Networking interface (1) 10/100/1000 MbE RJ45 port Power method 24V passive PoE (Pairs 4, 5 ; 7, 8- ) Power supply 24V, 0.5A Gigabit PoE adapter (Included) Supported voltage range 22—26V Max. power consumption 8.5W ESD/EMP protection Air/contact: ± 24kV Operating temperature -40 to 60° C (-40 to 140° F) Operating humidity 5 to 95% non-condensing Certifications CE, FCC, IC Software OS airOS® Modes PtMP CPE only Management interface Bluetooth management for easy setup over UISP App WEB UI Minimum software requirements Any modern web browser/iOS™ or Android™ based smartphone System Maximum throughput 900 Mbps* *FW version 2.3.0 and later. RF Operating frequency* US/CA U-NII-1 U-NII-2A U-NII-2C U-NII-3 EU Worldwide 5150 – 5250 MHz 5250 – 5350 MHz 5470 – 5725 MHz 5725 – 5850 MHz 2400 – 2483.5 MHz 5150 – 5875 MHz 2400 – 2483.5 MHz 4800 – 6200 MHz *Depends on regulatory region. Max. conducted TX power 22 dBm (per chain) Channel bandwidth 10/20/30/40/50/60/80/100 MHz* *FW version 2.3.0 and later. Antenna gain 13 dBi Cross-pol isolation 20 dB Max. VSWR 1.8:1 Beamwidth HPOL/VPOL/elevation: 45° Polarization Dual linear LEDs System Flashing white: bootup in progress White: ready for use, not connected to the UISP application Flashing blue: locate in progress Blue: connected to the UISP application Blue/white: firmware upgrade in progress Category: Routers & Access Points
